Other Products: ‘Solvacid’ Diaphragm Pump and ‘Liqua air’ Pneumatic Barrel Pump

SOLVACID Diaphragm Type Hand Pump

No leak- no stuffing box or seals. No gland packings to replace. Pumps acids, alkalis, solvents & alcohols. Pumps liquids with fine suspensions. Self Priming. Easy to clean and maintain. Light Weight. Adaptable for motor drive. Manufactured in two models to cover a very wide variety of liquid handling. Construction of Wetted Parts: Code Body Valves Diaphragm MOC-1 SS 316 SS 316 Teflon Laminated MOC-2 Polypropylene Vilton Teflon Laminated

Valves can be supplied in hypalon & EDPM also, if required.
Discharge and Suction are 1” bore (25 mm) and 11/4 bore PVC or synthetic rubber hose, which can be slipped on and secured by clips.

Capacity: Approximately 15 ltrs. at 100 strokes per minute. Can deliver upto 10 ft. of water column.

Optional Accessories: Trolley to fit the pump to make it easily portable. Motor Drive: The pump can easily be converted into motor driven pump with a ½ HP geared motor having 100RPM output speed approximately. Suitable base can be supplied to mount the motor and coupling it directly to the pump.

SLEEK Motorised Drum & Container Pumps
Safety is most important in places where barrel pumps are in use to handle aggressive, combustible, explosive and environmentally harmful media. ‘SLEEK’ has a whole new range of barrel pumps meeting stringent safety demands. For th first time in India, ‘SLEEK’ pumps incorporate high efficiency FLAMEPROOF (Ex) Electric Motor approved by CMRS for operation in flammable / explosive gas atmospheres for Groups I, II-A, and II-B as per IS: 2148, 1981 and IS: 2147, 1962 (flame proof and weather proof).

A) Stainless Steel Type SS-316:
Inner and outer pipes are of seamless type made of SS-316. All contact parts are made from SS-316 investment castings. The drive shaft is made of SS-316 bright bar. Impeller s made of TEFZEL / SS-316. The shaft sleeve and lip seal are made of Teflon.

1) Flame Proof Applications: a) CMRS approved flameproof and weatherproof electric motor. Drive Unit TEFC, single phase, 230 volts, 50 HZ, 0.7 HP, 15,000 RPM AC/ DC electric motor. Operating Data: Capacity: 100 LPM at open discharge. Head: Upto 15 mtrs. max. Operation: Intermittent. Weight: 12.5 kg. SS-316 pump and 9.0 kg PP pump with motor. Temp. upto 120 (SS tube). Upto 70 (PP tube). b) As an alternative to flameproof motor, Pneumatically operated 21000 RPM motor is also available. Regulatd Type air motor working at 5-8 Kg/ Cm2 air pressure and consuming 20-25 cfm of air. Operating Data: Capacity: 110 LPM at open discharge. Head: Upto 25 mtrs. Operation: Continuous for 1-2 hrs. Weight: 6.9 kg SS -316 pump and 3.8 kg PP pump with motor. Temp. Upto 120 (SS tube). Upto 70 (PP tube).

Typical Applications: Solvents, Varnishes, Paints, Gasoline, Petroleum Products, Fuel Oil, Pesticides, Degreasing Agents, Drugs and Pharmaceuticals and Inflammable Corrosive Liquids.

2) Non-Flame Proof Applications: Drive unit for general application. The pump is coupled to non-flameproof, single phase, 230 volts, 50 HZ, 15,000 RPM, 0.7 HP, AC/DC Type Universal Electric Motor. Operating Data: Capacity: 100 LPM at open discharge. Head:15 mtrs. max. Operation: Intermittent. Weight: 8.5 kg (SS-316 pump) 6.0 kg (PP pump with motor). Temp, upto 120 (SS tube). Upto 70 (PP tube). Typical Applications: Salt Solutions, Soap Solutions, Electroplating Solutions, Photographic Developers, Lubricants, Acids, Alkalies, Edible Oils, Water treatment Chemicals, Fruit Juices and Non-flammable Corrosive Liquids.

B) Polypropylene Type:
Outer and inner pipes and all wetted parts are made of polypropylene. The shaft is made of HastealloyB-2 for highly corrosive liquids. The impller is made of TEFZL. The shaft sleeve is of PTFE.

C) Tube Lengths Available:
Both in SS-316 and Polypropylene: a) standard barrel 1150 mm b) Carbuoys / Jerrycans 750 mm.

High Head, Air Operated, Pump in Teflon / SS 316 / PP

All contact parts in PTFE / SS 316 / Polypropylene. Compressed air operated, flame proof. Glandless, No leakage. Self priming, can run dry without liquid indefinitely. Simple design, only one moving art, no maintenance. Stress-free, long life. PTFE membrane diaphragm. Controllable capacity 0 to 2 ltrs. per minute. Vertical head upto 20 mtrs. Suction lift upto 2 mtrs. Portable, wt. 4 kg. No foundation required. Supplied with suitable suction and delivery tubing in ready-to-use form. Operates on 1 HP compressor or plant air of 30 to 150 psi (2 to 10 ). Can suck out to the last drop from the barrel, good for costly liquids. Can also find innovative applications. Applications: Barrel unloading of chemicals, High head transfer of solvents, Dosing / injecting of oils, In-plant transfer of corrosives, Circulation of hazardous chemicals, Filteration of inflammables, Repacking of difficult to handle liquids, Controlled feeding of perfumes, allied chemicals, aniline & amines etc. In Teflon: Bromine, Fuming Nitric Acid, Con. Sulphuric Acid, Ileum, Thionyl Chloride, Sulphuryl Chloride, Chlorosulphonic Acid, Iodine Solution, Acrylonitrite and many other highly corrosive chemicals. In SS 316: Solvents, Oils, Alcohols, Aldehydes, Ketone, MEK, MIBK, Benzene and other aromatics. Aniline and other amines. Furfural and other heterocyclics, Chlorinated and halogenated solvents, terpene, perfumes and allied chemicals, inks, varnishes and thinners. Cyclohexane and other alicyclics, Hydrazine, Phenol and Cresol. Pesticides, Hexane and other aliphatics, Glycols, Plasticisers, Ethyl acetate, VAM etc. In polypropylene: Acids, Alkalis, PC13, Hypochorites, Chromates, Salt Solutions, Water Treatment Chemicals, photographic Chemicals etc. Construction: The pump consists of two sides, Air Side and Liquid Side. These sides are divided by a thin flexible PTFE diaphragm. On Air Side lies air chamber, venturi, central rod with poppet valve and exhaust port. On Liquid Side are liquid chamber, suction and delivery ball check valves with hose nipples. All of these are in PTFE / SS 316 / PP. Check valves are in PTFE in all three MOC.